Quality Control Actions > 2D/3D > Dimensions with Incorrect Deviations

 

<Action Name="Dimensions with Incorrect Deviations" Uid="1aa060a2-0a85-44de-aba7-ae85a9d65a7e" LogicUid="49f1a002-3b7d-4398-a582-e0e431b90876">

<Parameters>

<Parameter Key="Upper Deviation" Name="Upper Deviation" Type="Double" Value="0.01"/>

<Parameter Key="Lower Deviation" Name="Lower Deviation" Type="Double" Value="-0.01"/>

<Parameter Key="Upper Fit Deviation" Name="Upper Deviation of Fit" Type="Double" Value="0.01"/>

<Parameter Key="Lower Fit Deviation" Name="Lower Deviation of Fit" Type="Double" Value="-0.01"/>

</Parameters>

</Action>

 

Objects to be checked: All dimensions (2D and 3D).

Customizable parameters:

•Lower Deviation
Data type: Double-precision floating point number.
Default value: -0.01.

•Lower Deviation of Fit
Data type: Double-precision floating point number.
Default value: -0.01.

•Upper Deviation
Data type: Double-precision floating point number.
Default value: 0.01.

•Upper Deviation of Fit
Data type: Double-precision floating point number.
Default value: 0.01.

The check uses units of measurement specified in document parameters (for 2D elements - Document Parameters > Page > Paper > Paper > Units, for 3D elements - Document Parameters > Document > 3D > Units > Length).

Check criteria: Check yields error, if deviations specified in parameters of a dimension do not fit ranges specified in action's parameters.

Auto-Fix: None.