Modifying Access Rights for Protected Document

The procedure of modifying access to protected documents is similar to setting access to documents.

First, select the option Set or Modify Access Rights for Documents in the starting dialog of the Document Protection command. The dialog will be launched for selecting files subject to setting or modifying the access. Then, select the protected documents or a folder with protected documents. In the list of files, select a file, from which the protection parameters will be read. If no such file is selected, then the protection parameters will be read from the first file in the list.

Depending on what type of Change access protection was used, the possibilities are as follows:

1. If the protection type was Specific HASP Plug or list of HASP Plugs, then, upon matching Key IDs, the access for change will be granted.

2. If the protection type was Password with HASP Plug, then, upon pressing the button Next, a dialog will appear, requesting the password for this protection. Upon entering the password, the access for changing the protection will be also granted.

3. Otherwise, if the hardware key is missing that was used at the time of setting this protection, or the password for accessing this protection was not entered, then you can press the button Cancel. In this case, an alternative access password will be asked. Upon entering the alternative password, the access to changing the protection will be granted. Next, a dialog will be displayed with the protection parameters set for the document. You can delete or change the parameters in this dialog.